Unique Selling Proposition
These motors pack a higher torque and power in a lower centre height so that an economic solution can be provided for the customer in these times of high copper and steel prices.
If the existing motor requires a torque upgrade to increase the line speed, these motors can be dropped in place with minimum mechanical modifications
The low inertia and high power of the motors allow superior performance in applications like shears and tailbrakes which require quick acceleration and deceleration.
The mechanical structure has been made very robust to ensure vibration free running at all speeds.
The designs are capable of a high field weakening range.
Good commutation is ensured for higher brush and commutator life.
Reliability of these motors has been accorded a higher importance than Cost and the mechanical design is robust and ideally suited for applications like rolling mills.
Construction
Laminated Yoke, Fabricated End Shells and Cast End Cover and bearing assembly
Cylindrical Roller Bearing on the Drive End and Ball Bearing on the Non-Drive End and non contact labyrinth seals
Large Terminal Box suitable for Aluminum cable termination
Larger blower motor, blower and filter to improve cooling and decrease the maintenance frequency.
Specifications
IEC frame sizes 180, 200, 250, 280, 315 and 355
Power upto 1000kW and Torque upto 13200Nm
Horizontal or Vertical Foot or flange designs
Class H Insulation
Ambient 40°C, Altitude 1000m
Blower, Duct, Air to Water and Air to Air Heat Exchanger variants
Shafts are suitable for single or tandem applications and can be specially adapted for the requirement
IP23 to IP55 protection
Built as per IS 4722 / IEC 60034
Power upto 1000kW and Torque upto 13200Nm
Horizontal or Vertical Foot or flange designs
Class H Insulation
Ambient 40°C, Altitude 1000m
Blower, Duct, Air to Water and Air to Air Heat Exchanger variants
Shafts are suitable for single or tandem applications and can be specially adapted for the requirement
IP23 to IP55 protection
Built as per IS 4722 / IEC 60034
Indicative Ratings
Our DC Motor designs are customized to suit specific application requirements. The following ratings are only indicative and we can provide highly optimized quotes against specific enquiries.
| Frame | kW | Armature Volts | Base RPM | Top RPM | Torque Nm |
|---|---|---|---|---|---|
| 180 | 260 | 440 | 2800 | 2800 | 887 |
| 150 | 440 | 1500 | 300 | 955 | |
| 120 | 440 | 1100 | 2200 | 1042 | |
| 200 | 310 | 440 | 2200 | 2200 | 1346 |
| 200 | 440 | 1350 | 2500 | 1416 | |
| 150 | 440 | 1000 | 2500 | 1433 | |
| 250 | 400 | 440 | 1000 | 2000 | 3822 |
| 312 | 440 | 810 | 2000 | 3680 | |
| 250 | 440 | 670 | 1700 | 3565 |
| Frame | kW | Armature Volts | Base RPM | Top RPM | Torque Nm |
|---|---|---|---|---|---|
| 280 | 570 | 440 | 1000 | 1800 | 5446 |
| 440 | 440 | 750 | 1500 | 5606 | |
| 300 | 440 | 500 | 1200 | 5733 | |
| 315 | 750 | 440 | 975 | 1150 | 7350 |
| 600 | 440 | 750 | 1500 | 7644 | |
| 500 | 440 | 630 | 1700 | 7583 | |
| 355 | 950 | 440 | 850 | 1000 | 10680 |
| 800 | 440 | 710 | 1100 | 10760 | |
| 630 | 440 | 550 | 1200 | 10950 |